User's Guide

You can attach a new scan list to your radio via Front
Panel Programming.
Note: This feature is not applicable in Capacity Plus
and Linked Capacity Plus.
Viewing an Entry in the Scan List
1
to access the menu.
2
or to Scan and press to select.
3
or to Scan List and press to
select.
4
Use or to view each member on the
list.
The Priority icon appears left of the member’s
alias, if set, to indicate whether the member is on
a Priority 1 or Priority 2 channel list. You cannot
have multiple Priority 1 or Priority 2 channels in a
scan list.
There is no Priority icon if priority is set to None.
Editing the Scan List
Adding a New Entry to the Scan List
1
to access the menu.
2
or to Scan and press to select.
3
or to Scan List and press to
select.
4
or to Add Member and press to
select.
5
or to the required alias or ID.
6
Press to select.
7
or to the required priority level and
press to select.
The display shows positive mini notice, followed
immediately by Add Another?.
Advanced Features in Non-Connect Plus Mode
55
English