User's Guide

Table Of Contents
Short press – Pressing and releasing rapidly.
Long press – Pressing and holding for the
programmed duration.
Hold down – Keeping the button pressed.
Note: The programmed duration of a button press is
applicable for all assignable radio/utility functions or
settings. See Emergency Operation on page 72 for
more information on the programmed duration of the
Emergency button.
Assignable Radio Functions
Bluetooth
®
Audio Switch — Toggles audio routing
between internal radio speaker and external
Bluetooth-enabled accessory.
Contacts — Provides direct access to the Contacts
list.
Call Alert — Provides direct access to the contacts
list for you to select a contact to whom a Call Alert
can be sent.
Call Forwarding — Toggles Call Forwarding on or
off.
Call Log — Selects the call log list.
Voice Announcement for Channel — Plays zone
and channel announcement voice messages for the
current channel. This function is unavailable when
Voice Announcement is disabled.
Emergency — Depending on the programming,
initiates or cancels an emergency.
Ext PA On/Off — Toggles the audio routing between
the connected public address (PA) loudspeaker
amplifier and the radio’s internal public address (PA)
system.
Intelligent Audio — Toggles intelligent audio on or
off.
Manual Dial — Depending on the programming,
initiates a Private or Phone Call by keying in any
subscriber ID or phone number.
Manual Site Roam
[2]
— Starts the manual site
search.
Mic AGC On/Off — Toggles the internal microphone
automatic gain control (AGC) on or off.
Monitor — Monitors a selected channel for activity.
Notifications — Provides direct access to the
Notifications list.
Additional Radio Controls in Non-Connect Plus Mode
23
English