User's Guide

file. For the Network Frequency File, this is an
automatic process and does not require a radio reset.
For the Option Board Codeplug File, this is an
automatic process that will cause a brief interruption
to service as the Option Board loads the new
codeplug information and re-acquires a network site.
How quickly the radio upgrades to a new Option
Board firmware file depends on how the radio has
been configured by the dealer or system
administrator. The radio will either upgrade
immediately after collecting all file packets, or it will
wait until the next time that the user turns the radio
on.
Note: Check with your dealer or system administrator
to determine how your radio has been programmed.
The process of upgrading to a new Option Board
firmware file takes several seconds, and it requires
the Connect Plus Option Board to reset the radio.
Once the upgrade starts, the radio use will not be
able to make or receive calls until the process is
completed.
Firmware File
Firmware Up to Date
Note: If the Option Board firmware file is not Up to
Date (and if the radio has partially collected a more
recent Option Board firmware file version) the radio
displays a list with additional options; Version,
%Received, and Download.
1
to access the menu.
2
or to Utilities and press to
select.
3
or to Radio Info and press to
select.
4
or to Updates and press to
select.
5
or to Firmware and press to
select.
The display shows Firmware is Up to Date.
Pending Firmware – Version
1
to access the menu.
Advanced Features in Connect Plus Mode
251
English