User's Guide

Table Of Contents
Radio
Controls
Steps
or to the
required alias or ID and
press to select.
use the Manual Dial menu
or to Manual
Dial and press to
select.
or to Radio
Number and press to
select.
The first line of the display
shows Radio Number:.
the second line of the
display shows a blinking
cursor. Use the keypad to
enter the subscriber alias
or ID and press
.
Radio
Controls
Steps
4
or to Radio
Disable and press to
select.
The display shows Radio Disable: <Target
Alias or ID> and the LED blinks green.
2 Wait for acknowledgement.
If successful, a positive indicator tone sounds and
the display shows Radio Disable Successful.
If not successful, a negative indicator tone sounds
and the display shows Radio Disable Failed.
Radio Enable
1 Access this feature by
Advanced Features in Connect Plus Mode
228
English