User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Déclaration de conformité
- Consignes de sécurité importantes
- Computer Software Copyrights
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contact Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Multi-Site Controls
- Security
- Lone Worker
- Bluetooth Operation
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Third Party Peripherals Connection Modes
- Utilities
- Setting the Squelch Level
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Language
- Turning Horns/Lights On or Off
- Turning the LED Indicator On or Off
- Turning the Public Address System On or Off
- Turning the External Public Address System On or Off
- Setting Dual Knob Operation Preference
- Turning the Introduction Screen On or Off
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Flexible Receive List
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating a Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Phone Call by Manual Dial
- Making a Phone Call with the One Touch Access Button
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Phone Call with the Programmable Phone Button
- Making a Phone Call from Contacts
- Making a Group, Private, Phone or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Text Messaging
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Text Entry Configuration
- Front Panel Configuration (FPC)
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Selecting a Site
- Selecting a Zone
- Using Multiple Networks
- Selecting a Call Type
- Receiving and Responding to a Radio Call
- Making a Radio Call
- Making a Call with the Channel Selector Knob
- Making a Private Call with a One Touch Call Button
- Making a Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call via the Phone Menu
- Making an Outbound Private Phone Call from Contacts
- Waiting for the Channel Grant in an Outbound Private Phone Call
- Making a Buffered Over-Dial in a Connected Outbound Private Phone Call
- Making a Live Over-Dial in a Connected Outbound Private Phone Call
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Turning Scan On or Off
- Editing the Scan List
- Add or Delete a Group via the Add Members Menu
- Understanding Scan Operation
- Scan Talkback
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Turning the Introduction Screen On or Off
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Menu Timer
- Turning Horns/Lights On or Off
- Setting Dual Knob Operation Preference
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Accessing General Radio Information
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
3 The microphone remains active for the “hot mic”
time specified in your radio's codeplug
programming.
During this time, the LED lights up green.
4 Press and hold the PTT button to talk longer than
the programmed duration.
Initiating an Emergency Alert
Note: If your radio is programmed for “Silent” or
“Silent with Voice”, it will not provide any audio or
visual indications that it is sending an Emergency
Alert. If programmed for “Silent”, the silent operation
continues indefinitely until you press PTT or the
button configured for “Emergency Off”. If programmed
for “Silent with Voice”, the radio automatically cancels
silent operation when the site controller broadcasts
the Emergency Alert.
Press the orange Emergency button.
Upon transmitting the Emergency Alert to the site
controller, the radio’s display shows the
Emergency icon, the Group contact used for the
Emergency Alert, and TX Alarm.
Once the Emergency Alert is successfully sent
and is being broadcast for other radios to hear, a
positive indicator tone sounds and the radio’s
display shows Alarm Sent. If the Emergency Alert
is unsuccessful, a negative indicator tone sounds
and the radio displays Alarm Failed.
Exiting Emergency Mode
Note: If the Emergency call ends due to the
expiration of the Emergency Hang Time, but the
emergency condition is not over, press the
Emergency button again to restart the process.
If you initiate an Emergency Alert by pressing the
programmed Emergency button, your radio
automatically exits Emergency mode after receiving a
response from the Connect Plus system.
If you initiate an Emergency call by pressing the
programmed Emergency button, your radio will be
assigned a channel automatically when one becomes
available. Once your radio has transmitted a
message indicating the emergency, you cannot
cancel your Emergency call. However, if you pressed
the button by accident or the emergency no longer
exists, you may wish to say this over the assigned
channel. When you release the PTT button, the
Advanced Features in Connect Plus Mode
214
English