User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Déclaration de conformité
- Consignes de sécurité importantes
- Computer Software Copyrights
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contact Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Multi-Site Controls
- Security
- Lone Worker
- Bluetooth Operation
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Third Party Peripherals Connection Modes
- Utilities
- Setting the Squelch Level
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Language
- Turning Horns/Lights On or Off
- Turning the LED Indicator On or Off
- Turning the Public Address System On or Off
- Turning the External Public Address System On or Off
- Setting Dual Knob Operation Preference
- Turning the Introduction Screen On or Off
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Flexible Receive List
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating a Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Phone Call by Manual Dial
- Making a Phone Call with the One Touch Access Button
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Phone Call with the Programmable Phone Button
- Making a Phone Call from Contacts
- Making a Group, Private, Phone or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Text Messaging
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Text Entry Configuration
- Front Panel Configuration (FPC)
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Selecting a Site
- Selecting a Zone
- Using Multiple Networks
- Selecting a Call Type
- Receiving and Responding to a Radio Call
- Making a Radio Call
- Making a Call with the Channel Selector Knob
- Making a Private Call with a One Touch Call Button
- Making a Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call via the Phone Menu
- Making an Outbound Private Phone Call from Contacts
- Waiting for the Channel Grant in an Outbound Private Phone Call
- Making a Buffered Over-Dial in a Connected Outbound Private Phone Call
- Making a Live Over-Dial in a Connected Outbound Private Phone Call
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Turning Scan On or Off
- Editing the Scan List
- Add or Delete a Group via the Add Members Menu
- Understanding Scan Operation
- Scan Talkback
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Turning the Introduction Screen On or Off
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Menu Timer
- Turning Horns/Lights On or Off
- Setting Dual Knob Operation Preference
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Accessing General Radio Information
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
The display shows Call Alert: <Subscriber
Alias or ID>Call Alert and the subscriber
alias or ID, indicating that the Call Alert has been
sent.
The LED lights up solid green when your radio is
sending the Call Alert.
If the Call Alert acknowledgement is received, the
display shows Call Alert Successful.
If the Call Alert acknowledgement is not received,
the display shows Call Alert Failed.
Making a Call Alert with the One Touch Access Button
• Press the programmed One Touch Access
button to make a Call Alert to the predefined alias.
The display shows Call Alert and the
subscriber alias or ID, indicating that the Call Alert
has been sent.
The LED lights up solid green when your radio is
sending the Call Alert.
If the Call Alert acknowledgement is received, the
display shows Call Alert Successful.
If the Call Alert acknowledgement is not received,
the display shows Call Alert Failed.
Emergency Operation
Note: If your radio is programmed for “Silent” or
“Silent with voice” emergency initiation, in most cases
it automatically exits silent operation after the
Emergency Call or Emergency Alert is finished. The
exception to this rule is when “Emergency Alert” is the
configured Emergency Mode and “Silent” is the
configured Emergency Type. If your radio is
programmed in this manner, the silent operation
continues until you cancel silent operation by
pressing PTT or the button configured for
“Emergency Off”.
Emergency voice calls and Emergency Alerts are not
supported when operating in Connect Plus Auto
Fallback mode. For more information see the Auto
Fallback on page 191.
An Emergency Alert is used to indicate a critical
situation. You can initiate an Emergency at any time
on any screen display, even when there is activity on
the current channel. Pressing the Emergency button
initiates the programmed Emergency mode. The
programmed Emergency mode may also be initiated
by triggering the optional Man Down feature. The
Emergency feature may be disabled in your radio.
Advanced Features in Connect Plus Mode
209
English