User's Guide

Scan Talkback
If your radio scans into a call from the selectable
group scan list, and if the PTT button is pressed
during the scanned call, the operation of the radio
depends on whether Scan Talkback was enabled or
disabled during radio programming. For more
information on how your radio is programmed,
contact your radio dealer (or your radio system
administrator).
Scan Talkback Disabled — The radio leaves the
scanned call and attempts to transmit on the contact
for the currently selected channel position. After the
Call Hang Time on the currently selected contact
expires, the radio returns to the home channel and
starts the Scan Hang Time Timer. The radio resumes
group scan after its Scan Hang Time Timer expires.
Scan Talkback Enabled — If the PTT button is
pressed during the Group Hang Time of the scanned
call, the radio attempts to transmit to the scanned
group.
Note: If you scan into a call for a group that is not
assigned to a channel position in the currently
selected zone and you miss the Hang Time of the
call, switch to the proper zone and then select the
channel position of the group to talk back to that
group.
Contacts Settings
Note: You can add, or edit subscriber IDs for Connect
Plus Contacts. Deleting subscriber IDs can only be
performed by your dealer.
If the Privacy feature is enabled on a channel, you
can make a privacy-enabled voice call on that
channel. Only target radios with the same Privacy
Key OR the same Key Value and Key ID as your
radio are able to unscramble the transmission.
Contacts provide “address-book” capabilities on your
radio. Each entry corresponds to an alias or ID that
you use to initiate a call.
Each zone provides a Contact List with up to 100
contacts. The following contact types are available:
• Private Call
• Group Call
• Multigroup Call
• Site All Call Voice
• Site All Call Text
• Dispatch Call
Advanced Features in Connect Plus Mode
201
English