User's Guide

Making an Outbound Private Phone Call from Contacts
Note: If the Phone Manual Dial is disabled in
MOTOTRBO Connect Plus Option Board CPS, the
Phone Number item will not be displayed in the
Menu.
1
to access the menu.
2
or to Contacts and press to
select.
3
or to Manual Dial and press to
select.
4
or to Phone Number and press
to select.
The first line of the display shows Number, the
second line of the display shows a blinking cursor.
5 Use the keypad to enter a telephone number, and
press to place a call to the entered number.
If the PTT button is pressed, the display shows a
negative mini notice, Press OK to Send and
returns to the previous screen.
Press to delete any unwanted characters. Press
followed by within 2 seconds to insert
a pause. The P replaces * and # on the display.
If successful, the first line of the display shows
Phone Call. The second line of the display shows
the dialed telephone number.
If
is pressed with no telephone number
entered, the radio sounds a positive indicator tone
then a negative indicator tone. The display
remains the same.
6
Long press to end the call.
The first line of the display shows Ending. The
second line of the display shows Phone Call....
The display shows Phone Call Ended.
Making and Receiving Calls in Connect Plus Mode
188
English