User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Déclaration de conformité
- Consignes de sécurité importantes
- Computer Software Copyrights
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contact Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Multi-Site Controls
- Security
- Lone Worker
- Bluetooth Operation
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Third Party Peripherals Connection Modes
- Utilities
- Setting the Squelch Level
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Language
- Turning Horns/Lights On or Off
- Turning the LED Indicator On or Off
- Turning the Public Address System On or Off
- Turning the External Public Address System On or Off
- Setting Dual Knob Operation Preference
- Turning the Introduction Screen On or Off
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Flexible Receive List
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating a Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Phone Call by Manual Dial
- Making a Phone Call with the One Touch Access Button
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Phone Call with the Programmable Phone Button
- Making a Phone Call from Contacts
- Making a Group, Private, Phone or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Text Messaging
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Text Entry Configuration
- Front Panel Configuration (FPC)
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Selecting a Site
- Selecting a Zone
- Using Multiple Networks
- Selecting a Call Type
- Receiving and Responding to a Radio Call
- Making a Radio Call
- Making a Call with the Channel Selector Knob
- Making a Private Call with a One Touch Call Button
- Making a Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call via the Phone Menu
- Making an Outbound Private Phone Call from Contacts
- Waiting for the Channel Grant in an Outbound Private Phone Call
- Making a Buffered Over-Dial in a Connected Outbound Private Phone Call
- Making a Live Over-Dial in a Connected Outbound Private Phone Call
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Turning Scan On or Off
- Editing the Scan List
- Add or Delete a Group via the Add Members Menu
- Understanding Scan Operation
- Scan Talkback
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Turning the Introduction Screen On or Off
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Menu Timer
- Turning Horns/Lights On or Off
- Setting Dual Knob Operation Preference
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Accessing General Radio Information
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
1 Do one of the following.
• Select the channel with the active subscriber
alias or ID. See Selecting a Call Type on page
179.
• Press the programmed One Touch Access
button.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green. The Private Call
icon appears on the top right corner. The first text
line shows the target subscriber alias. The second
text line displays the call status.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
5 Release the PTT button to listen.
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends. You hear a short
tone. The display shows Call Ended.
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If
the target radio is not available, you hear a short tone
and see negative mini notice on the display.
Making a Site All Call
This feature allows you to transmit to all users on the
site that are currently not engaged in another call.
Your radio must be programmed to allow you to use
this feature.
Users on the channel/site cannot respond to an All
Call.
1 Select the channel with the active All Call group
alias. See Selecting a Call Type on page 179.
2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
3 Press the PTT button to make the call.
The LED lights up solid green.The Group Call icon
appears in the top right corner. The first text line
shows All Call.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
Making and Receiving Calls in Connect Plus Mode
184
English