User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Déclaration de conformité
- Consignes de sécurité importantes
- Computer Software Copyrights
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contact Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Multi-Site Controls
- Security
- Lone Worker
- Bluetooth Operation
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Third Party Peripherals Connection Modes
- Utilities
- Setting the Squelch Level
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Language
- Turning Horns/Lights On or Off
- Turning the LED Indicator On or Off
- Turning the Public Address System On or Off
- Turning the External Public Address System On or Off
- Setting Dual Knob Operation Preference
- Turning the Introduction Screen On or Off
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Flexible Receive List
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating a Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Phone Call by Manual Dial
- Making a Phone Call with the One Touch Access Button
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Phone Call with the Programmable Phone Button
- Making a Phone Call from Contacts
- Making a Group, Private, Phone or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Text Messaging
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Text Entry Configuration
- Front Panel Configuration (FPC)
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Selecting a Site
- Selecting a Zone
- Using Multiple Networks
- Selecting a Call Type
- Receiving and Responding to a Radio Call
- Making a Radio Call
- Making a Call with the Channel Selector Knob
- Making a Private Call with a One Touch Call Button
- Making a Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call via the Phone Menu
- Making an Outbound Private Phone Call from Contacts
- Waiting for the Channel Grant in an Outbound Private Phone Call
- Making a Buffered Over-Dial in a Connected Outbound Private Phone Call
- Making a Live Over-Dial in a Connected Outbound Private Phone Call
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Turning Scan On or Off
- Editing the Scan List
- Add or Delete a Group via the Add Members Menu
- Understanding Scan Operation
- Scan Talkback
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Turning the Introduction Screen On or Off
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Menu Timer
- Turning Horns/Lights On or Off
- Setting Dual Knob Operation Preference
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Accessing General Radio Information
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
shows the caller alias. The second text line displays
the group call alias. Your radio unmutes and the
incoming call sounds through the radio's speaker.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
The LED lights up solid green.
2 Wait for one of the Talk Permit Tone to finish (if
enabled), and speak clearly into the microphone.
3 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
Note: See Making a Group Call on page 183 for
details on making a Group Call.
Receiving and Responding to a Private Call
A Private Call is a call from an individual radio to
another individual radio.
When you receive a Private Call, the LED blinks
green. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second
line displays Private Call and the Private Call icon.
Your radio unmutes and the incoming call sounds
through the radio's speaker.
1 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button to respond to the call.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If there is no voice activity for a predetermined period
of time, the call ends.
The display shows Call Ended.
See Making a Private Call on page 183 for details on
making a Private Call.
Receiving a Site All Call
A Site All Call is a call from an individual radio to
every radio on the site. It is used to make important
announcements requiring the user’s full attention.
When you receive an All Call, a tone sounds and the
LED blinks green.
Making and Receiving Calls in Connect Plus Mode
180
English