User's Guide
Table Of Contents
- Contents
- Declaration of Conformity
- Important Safety Information
- Software Version
- Déclaration de conformité
- Consignes de sécurité importantes
- Computer Software Copyrights
- Getting Started
- Preparing Your Radio for Use
- Identifying Radio Controls
- Non-Connect Plus Operations
- Additional Radio Controls in Non-Connect Plus Mode
- Making and Receiving Calls in Non-Connect Plus Mode
- Advanced Features in Non-Connect Plus Mode
- Radio Check
- Remote Monitor
- Scan Lists
- Scan
- Vote Scan
- Contact Settings
- Call Indicator Settings
- Activating and Deactivating Call Ringers for Call Alert
- Activating and Deactivating Call Ringers for Private Calls
- Activating and Deactivating Call Ringers for Selective Call
- Activating and Deactivating Call Ringers for Text Message
- Activating and Deactivating Call Ringers for Telemetry Status with Text
- Assigning Ring Styles
- Escalating Alarm Tone Volume
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Job Tickets
- Privacy
- Multi-Site Controls
- Security
- Lone Worker
- Bluetooth Operation
- Notification List
- Auto-Range Transponder System (ARTS)
- Over-the-Air-Programming (OTAP)
- Third Party Peripherals Connection Modes
- Utilities
- Setting the Squelch Level
- Setting the Power Level
- Turning the Option Board Feature(s) On or Off
- Identifying Cable Type
- Turning the Voice Operating Transmission (VOX) Feature On or Off
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Text Message Alert Tone
- Changing the Display Mode
- Adjusting the Display Brightness
- Language
- Turning Horns/Lights On or Off
- Turning the LED Indicator On or Off
- Turning the Public Address System On or Off
- Turning the External Public Address System On or Off
- Setting Dual Knob Operation Preference
- Turning the Introduction Screen On or Off
- Voice Announcement
- Call Forwarding
- Menu Timer
- Analog Mic AGC (Mic AGC-A)
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Flexible Receive List
- Accessing General Radio Information
- Keypad Microphone Features
- Using the Keypad
- Additional Advanced Features
- Selecting a Zone by Alias Search
- Initiating a Radio Check by Manual Dial
- Initiating a Remote Monitor by Manual Dial
- Making a Private Call by Manual Dial
- Making a Phone Call by Manual Dial
- Making a Phone Call with the One Touch Access Button
- Making a Group, Private or All Call with the Programmable Number Key
- Making a Phone Call with the Programmable Phone Button
- Making a Phone Call from Contacts
- Making a Group, Private, Phone or All Call by Alias Search
- Viewing an Entry in the Scan List by Alias Search
- Editing the Scan List
- Storing an Alias or ID from a Call List
- Making a Call Alert by Manual Dial
- RSSI Values
- Text Messaging
- Dual Tone Multi Frequency (DTMF)
- Security
- Password Lock Features
- Text Entry Configuration
- Front Panel Configuration (FPC)
- Connect Plus Operations
- Additional Radio Controls in Connect Plus Mode
- Making and Receiving Calls in Connect Plus Mode
- Selecting a Site
- Selecting a Zone
- Using Multiple Networks
- Selecting a Call Type
- Receiving and Responding to a Radio Call
- Making a Radio Call
- Making a Call with the Channel Selector Knob
- Making a Private Call with a One Touch Call Button
- Making a Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call with the Programmable Manual Dial Button
- Making an Outbound Private Phone Call via the Phone Menu
- Making an Outbound Private Phone Call from Contacts
- Waiting for the Channel Grant in an Outbound Private Phone Call
- Making a Buffered Over-Dial in a Connected Outbound Private Phone Call
- Making a Live Over-Dial in a Connected Outbound Private Phone Call
- Advanced Features in Connect Plus Mode
- Auto Fallback
- Radio Check
- Remote Monitor
- Scan
- User Configurable Scan
- Turning Scan On or Off
- Editing the Scan List
- Add or Delete a Group via the Add Members Menu
- Understanding Scan Operation
- Scan Talkback
- Contacts Settings
- Call Indicator Settings
- Call Log Features
- Call Alert Operation
- Emergency Operation
- Text Message Features
- Privacy
- Security
- Bluetooth Operation
- Notification List
- Utilities
- Turning the Radio Tones/Alerts On or Off
- Setting the Tone Alert Volume Offset Level
- Turning the Talk Permit Tone On or Off
- Turning the Power Up Alert Tone On or Off
- Setting the Power Level
- Changing the Display Mode
- Adjusting the Display Brightness
- Turning the Introduction Screen On or Off
- Language
- Turning the LED Indicator On or Off
- Identifying Cable Type
- Voice Announcement
- Menu Timer
- Turning Horns/Lights On or Off
- Setting Dual Knob Operation Preference
- Digital Mic AGC (Mic AGC-D)
- Intelligent Audio
- Turning the Acoustic Feedback Suppressor Feature On or Off
- Global Positioning System (GPS)
- Accessing General Radio Information
- Accessories
- Maritime Radio Use in the VHF Frequency Range
- Limited Warranty
assigned to the desired network. These network-to-
zone assignments are configured by your dealer
through radio programming.
Selecting a Call Type
Use the Channel Selector Knob to select a call type.
This can be a Group Call, Multi-group Call, Site All
Call or Private Call, depending on how your radio is
programmed. If you change the Channel Selector
Knob to a different position (that has a call type
assigned to it), this causes the radio to re-register
with the Connect Plus site. The radio registers with
the Registration Group ID that has been programmed
for the new Channel Selector Knob position call type.
If you select a position that has no call type assigned
to it, your radio sounds a continuous tone and the
display shows Unprogrammed. Your radio does not
operate when selected to an unprogrammed channel,
use the Channel Selector Knob to select a
programmed channel instead.
Once the required zone is displayed (if you have
multiple zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Receiving and Responding to a Radio Call
Once the channel, subscriber ID or call type is
displayed, you can proceed to receive and respond to
calls.
The LED lights up solid green while the radio is
transmitting and blinks green when the radio is
receiving.
Note: The LED lights up solid green while the radio is
transmitting and double blinks green when the radio
is receiving a privacy-enabled call. To unscramble a
privacy-enabled call, your radio must have the same
Privacy Key, OR the same Key Value and Key ID
(programmed by your dealer), as the transmitting
radio (the radio you are receiving the call from).
Note: See Privacy on page 225 for more information.
Receiving and Responding to a Group Call
To receive a call from a group of users, your radio
must be configured as part of that group.
When you receive a Group Call (while on the Home
screen), the LED blinks green. The Group Call icon
appears in the top right corner. The first text line
Making and Receiving Calls in Connect Plus Mode
179
English