User's Guide

If unsuccessful, your radio returns to the Phone
Call screen. Repeat the Step 8 on page 143 or
wait for the telephone user to end the call.
When you press the PTT button while in the
Phone Contacts screen, as tone sounds and the
display shows Press OK to Place Phone Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call
Ended.
If the call ends while you are entering the extra
digits requested by the Phone Call, your radio
returns to the screen you were on prior to initiating
the call.
Note:
During the channel access, press to dismiss
the call attempt and a tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end
the call.
During channel access and access/deaccess code
or extra digits transmission, you radio responds to
On/Off button, Volume Knob, and Channel
Rocker only. A tone sounds for every invalid input.
The access or deaccess code cannot be more
than 10 characters.
Viewing an Entry in the Scan List by Alias Search
1
to access the menu.
2
or to Scan and press to select.
3
or to Scan List and press to
select.
4 Key in the first character of the required alias.
A blinking cursor appears.
5 Use the keypad to type the required alias.
Press
to move one space to the left.
Press to move one space to the right.
Keypad Microphone Features
144
English