User's Guide

During the channel access, press to dismiss
the call attempt and a tone sounds.
During the call, when you press One Touch
Access button with the deaccess code
preconfigured or enter the deaccess code as the
input for extra digits, your radio attempts to end
the call.
During channel access and access/deaccess code
or extra digits transmission, you radio responds to
On/Off button, Volume Knob, and Channel
Rocker only. A tone sounds for every invalid input.
The access or deaccess code cannot be more
than 10 characters.
Making a Group, Private, Phone or All Call by Alias
Search
1
to access the menu.
2
or to Contacts and press to
select.
The entries are alphabetically sorted.
3 Do one of the following:
•
or to the required subscriber alias
or ID.
•
or to Manual Dial and press
to select.
or to Phone Number and press
to select.
The first line of the display shows Phone
Number:. The second line of the display shows
a blinking cursor. Use the keypad to enter a
telephone number.
4
Press to select.
If the entry selected is empty, a negative indicator
tone sounds and the display shows Phone Call
Invalid #.
5
or to Call Phone and press to
select.
If the access code was not preconfigured in the
Contacts list, the first line of the display shows
Access Code:. The second line of the display
Keypad Microphone Features
142
English