User's Guide

Note: If the button is pressed when the radio
is waiting for acknowledgement, a tone sounds
and the radio terminates all retries and exits Radio
Check mode.
Radio returns to the subscriber alias or ID screen.
Initiating a Remote Monitor by Manual Dial
1
to access the menu.
2
or to Contacts and press to
select.
3
or to Manual Dial and press to
select.
4
or to Radio Number and press to
select.
5 Do one of the following:
• If there was previously dialed ID, the ID
appears along with a blinking cursor. Use the
keypad to edit the ID. Press to select.
• Key in the subscriber alias or ID and press
.
6
or to Remote Mon. and press to
select.
The display shows transitional mini notice,
indicating the request is in progress. The green
LED lights up.
7 Wait for acknowledgement
If successful, a positive indicator tone sounds and
the display shows positive mini notice. Your radio
starts playing audio from the monitored radio for a
programmed duration and display shows Rem.
Monitor. Once the timer expires, the radio sounds
an alert tone and the LED turns off.
If unsuccessful, a negative indicator tone sounds
and the display shows negative mini notice.
Note: If the button is pressed when the radio
is waiting for acknowledgement, a tone sounds
and the radio terminates all retries and exits Radio
Check mode.
Keypad Microphone Features
132
English