User's Manual

27
Contacts
4 To assign a Contacts type to the number or address
being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note: For information about creating SDG lists, see
“Creating SDG Lists in Contacts” on page 61.
5 To store a number or address:
Select the
# field (or ID for an email address, or IP for an
IP address).
Enter the number or address. For phone numbers, use
the 10-digit format. For email addresses, see “Entering
Text” on page 70.
Tip: Press
A
under Browse to select a number or
address from Contacts, the recent calls list, or
Memo.
When you are finished, press
o
.
6 If you want to change the default Speed Dial number
or a create a voice name for the entry, select [Options].
See “Assigning a Speed Dial Number or Voice Name” on
page 40.
7 If you want to add more numbers or addresses to the
entry:
Scroll past the information you already entered.
Enter the additional information for the entry using
step 3 through step 6. You must assign a name to the
entry, if you have not already.
8 Press
A
under Save.
Assigning a Ring Tone or Picture
1 If you have not already, select [Ring Tone/Picture].
2 If you want to assign a ring tone from the list of ring
tones:
With Ringer highlighted, scroll left or right to choose a
ring tone. -or-
Select Ringer. Select the ring tone you want to assign.
3 If you want to assign a picture from the media center:
Scroll to Picture. Scroll left or right to choose a picture.
-or-
Select Picture. Select the picture you want to assign.
Only pictures that can be assigned to Contacts entries are
displayed. Some large pictures cannot be assigned.