User's Manual

3
Getting Started
When You Power On For the First Time
If the Enter SIM PIN Code screen appears, enter your SIM
PIN. See “Entering the PIN” on page 9.
Press
A
under Ok.
When you receive your phone, the SIM PIN is 0000. Change
your PIN to prevent fraudulent use of the SIM card (see
“Changing the PIN” on page 13).
As your phone connects to the network, you will see a
welcome message and a connecting message. When the
idle screen appears, the phone is ready to use.
Ignition Sensor Powering
Your M710 phone powering is controled by an ignition
sensor, that will:
• Automatically power on the phone after the car was
started.
• When not in active call, power off the phone after the car
was tuned off.
• When turning the car off while in active call, to leave the
phone powered on, and powwer it off 6 seconds after
the call ended.
For more information, see in the phone's installation guide.
Enabling Over-the-Air Security
If you are set up to receive over-the-air programming from
your service provider, you must enable security the first
time you power on your phone or within 10 days of first
activation of your phone:
1 When you power on your phone for the first time, after
the idle screen appears, you will be prompted to select
Ok to update your browser information.