User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsMOBILE 2-WAY RADIO

100

Table Of Contents

Product Safety and RF Exposure Compliance
ATTENTION!
Computer Software Copyrights
Documentation Copyrights
Disclaimer
Patent Disclosure
Notations Used in This Manual
Getting to Know Your Radio
- Important Rebanding Information
- Major Radio Components
  - The XTL 1500 Radio
  - The Control Head
- Using Your Radio: The Basics
Basic Radio Operation
- Monitoring Conventional Modes
- Selecting a Zone and Mode (Channel)
- Receiving on a Conventional Mode
- Adjusting the Squelch Setting
- Receiving on Trunked Systems
- Transmitting on Conventional Modes
- Transmitting on Trunked Systems
- Time-Out Timer
Common Radio Features
- Sending a Status Call (Trunking Only)
- Selecting Transmit Power Level
- Conventional Squelch Options
  - Analog Squelch Options
  - Digital Squelch Options
- Sending an Emergency Alarm
  - Sending an Emergency Call
  - Special Considerations for Emergencies
- Types of Scan
  - Turning Scan On or Off
  - Deleting Nuisance Modes
- PTT-ID (Optional)
- Time-Out Timer
- Telephone Operation (Conventional and Trunking)
  - Answering a Telephone Call
- Call Alert (Conventional and Trunking)
- Optional External Alarms (Horn and/or Lights)
  - Turning External Alarm(s) On or Off
  - When a Call Is Received While Alarms Are Turned On
Conventional Features
- Repeater/Direct Operation
- Status Calls (Digital Modes Only)
  - Sending a Status Call
- Smart PTT
- Talkgroup Calls
  - Selecting a Talkgroup
- Selective Calls
Trunking Features
- Features Used on Trunking Systems
- Viewing Your Radio’s ID Number
- Programming a Page or Call Number
- Programming a Page or Call Name
  - Hang Up Box (HUB)
- Enhanced Private Conversation
- Dynamic Regrouping
  - Electronic (Menu) Mode Selection
  - Selecting Enable and Disable
- SmartZone Operation
- Out-of-Range Indication
- Trunked Announcement
  - Initiating an Announcement
Secure Features
- Features Available on Secure XTL 1500
- Transmitting in Secure and Clear Modes
- System Considerations
- Loss Indication
- Selecting a Key (Conventional Only)
Troubleshooting
Accessories
- Antennas
- Speakers
- Trunnion Kits
Appendix: Maritime Radio Use in the VHF Frequency Range
- Special Channel Assignments
  - Emergency Channel
  - Non-Commercial Call Channel
- Operating Frequency Requirements
Glossary
Commercial Warranty and Service
- Limited Warranty
- Service
Index
Control Head Foldout Page

ASTRO XTL 1500 Digital Mobile Radio with Control Head 77

Troubleshooting

The following are suggestions to assist you in troubleshooting

possible operating problems.

If your radio is locked up or the display shows FL 01/90, turn the

radio off and then back on. If this does not correct the condition, take

the radio to a qualified radio technician for service.

If radio operation is intermittent, check with other persons using the

system for similar problems before taking the radio in for service.

Similar problems indicate a system malfunction rather than a radio

failure.

If symptoms persist or, if your unit exhibits other problems, contact a

qualified radio technician.

The cables that connect to the rear of

the radio could have live voltage on

some of their pins. Do not remove or

reconnect these cables. Only a

qualified radio technician should

perform this task. Service performed

by unauthorized personnel may cause

the radio to transmit an emergency

alarm even if the unit is turned off.

CAUTION

96C67_Text.book Page 77 Thursday, March 1, 2007 8:54 AM