User's Manual
Table Of Contents
- Product Safety and RF Exposure Compliance
- ATTENTION!
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Patent Disclosure
- Notations Used in This Manual
- Getting to Know Your Radio
- Basic Radio Operation
- Common Radio Features
- Conventional Features
- Trunking Features
- Secure Features
- Troubleshooting
- Accessories
- Appendix: Maritime Radio Use in the VHF Frequency Range
- Glossary
- Commercial Warranty and Service
- Index
- Control Head Foldout Page
ASTRO XTL 1500 Digital Mobile Radio with Control Head 67
Trunking Features
Dynamic Regrouping
This feature is programmed in each radio by a qualified radio
technician. During special operations, dynamic regrouping allows the
dispatcher to temporarily reassign selected radios to a single trunked
mode so they can communicate with each other.
Electronic (Menu) Mode Selection
Dynamic Regrouping is transparent to you until the dispatcher
activates it. You hear an invalid-mode tone if you select dynamic
regrouping from the radio menu and it is not active.
• If you hear a gurgle-like tone, dynamic regrouping is activated.
Transmit and receive as usual.
• When the dispatcher cancels dynamic-regrouping:
– The radio returns to the pre-dynamic regrouping mode if the
dynamic regrouping mode was selected.
– The radio remains active on the selected mode if the dynamic
regrouping mode was not selected.
Selecting Enable and Disable
The dispatcher can classify regrouped radios as select-enabled or
select-disabled.
• Select-enabled radios can be changed to any available mode
including the dynamic regrouping mode, once the dynamic
position is selected.
• Select-disabled radios can not be changed from the dynamic
mode that the dispatcher has selected.
Note: Scan, phone, and Private Conversation cannot be selected
while the radio is select disabled.
96C67_Text.book Page 67 Thursday, March 1, 2007 8:54 AM