User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsMOBILE 2-WAY RADIO

Table Of Contents

Product Safety and RF Exposure Compliance
ATTENTION!
Computer Software Copyrights
Documentation Copyrights
Disclaimer
Patent Disclosure
Notations Used in This Manual
Getting to Know Your Radio
- Important Rebanding Information
- Major Radio Components
  - The XTL 1500 Radio
  - The Control Head
- Using Your Radio: The Basics
Basic Radio Operation
- Monitoring Conventional Modes
- Selecting a Zone and Mode (Channel)
- Receiving on a Conventional Mode
- Adjusting the Squelch Setting
- Receiving on Trunked Systems
- Transmitting on Conventional Modes
- Transmitting on Trunked Systems
- Time-Out Timer
Common Radio Features
- Sending a Status Call (Trunking Only)
- Selecting Transmit Power Level
- Conventional Squelch Options
  - Analog Squelch Options
  - Digital Squelch Options
- Sending an Emergency Alarm
  - Sending an Emergency Call
  - Special Considerations for Emergencies
- Types of Scan
  - Turning Scan On or Off
  - Deleting Nuisance Modes
- PTT-ID (Optional)
- Time-Out Timer
- Telephone Operation (Conventional and Trunking)
  - Answering a Telephone Call
- Call Alert (Conventional and Trunking)
- Optional External Alarms (Horn and/or Lights)
  - Turning External Alarm(s) On or Off
  - When a Call Is Received While Alarms Are Turned On
Conventional Features
- Repeater/Direct Operation
- Status Calls (Digital Modes Only)
  - Sending a Status Call
- Smart PTT
- Talkgroup Calls
  - Selecting a Talkgroup
- Selective Calls
Trunking Features
- Features Used on Trunking Systems
- Viewing Your Radio’s ID Number
- Programming a Page or Call Number
- Programming a Page or Call Name
  - Hang Up Box (HUB)
- Enhanced Private Conversation
- Dynamic Regrouping
  - Electronic (Menu) Mode Selection
  - Selecting Enable and Disable
- SmartZone Operation
- Out-of-Range Indication
- Trunked Announcement
  - Initiating an Announcement
Secure Features
- Features Available on Secure XTL 1500
- Transmitting in Secure and Clear Modes
- System Considerations
- Loss Indication
- Selecting a Key (Conventional Only)
Troubleshooting
Accessories
- Antennas
- Speakers
- Trunnion Kits
Appendix: Maritime Radio Use in the VHF Frequency Range
- Special Channel Assignments
  - Emergency Channel
  - Non-Commercial Call Channel
- Operating Frequency Requirements
Glossary
Commercial Warranty and Service
- Limited Warranty
- Service
Index
Control Head Foldout Page

Conventional Features

Entering Directly the ID Number to Be Called

You can use the keypad to directly enter the ID number of the person

you want to call. Follow these steps to enter the ID directly:

1 For Selective Call, press the CALL softkey.

The display shows the last ID number

transmitted or received.

2 Use the keypad to enter the new ID

number.

Notes: If you enter more than, or less than, six digits and press the

PTT button, you will hear a bad key-press tone.

Press the < button to move the cursor to the left and

erase the previous digit. When you have erased the last

digit, press the < button to display the last entry in the list.

Press the > button to display the first list entry.

LIST

96C67_Text.book Page 48 Thursday, March 1, 2007 8:54 AM