User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsMOBILE 2-WAY RADIO

Table Of Contents

Product Safety and RF Exposure Compliance
ATTENTION!
Computer Software Copyrights
Documentation Copyrights
Disclaimer
Patent Disclosure
Notations Used in This Manual
Getting to Know Your Radio
- Important Rebanding Information
- Major Radio Components
  - The XTL 1500 Radio
  - The Control Head
- Using Your Radio: The Basics
Basic Radio Operation
- Monitoring Conventional Modes
- Selecting a Zone and Mode (Channel)
- Receiving on a Conventional Mode
- Adjusting the Squelch Setting
- Receiving on Trunked Systems
- Transmitting on Conventional Modes
- Transmitting on Trunked Systems
- Time-Out Timer
Common Radio Features
- Sending a Status Call (Trunking Only)
- Selecting Transmit Power Level
- Conventional Squelch Options
  - Analog Squelch Options
  - Digital Squelch Options
- Sending an Emergency Alarm
  - Sending an Emergency Call
  - Special Considerations for Emergencies
- Types of Scan
  - Turning Scan On or Off
  - Deleting Nuisance Modes
- PTT-ID (Optional)
- Time-Out Timer
- Telephone Operation (Conventional and Trunking)
  - Answering a Telephone Call
- Call Alert (Conventional and Trunking)
- Optional External Alarms (Horn and/or Lights)
  - Turning External Alarm(s) On or Off
  - When a Call Is Received While Alarms Are Turned On
Conventional Features
- Repeater/Direct Operation
- Status Calls (Digital Modes Only)
  - Sending a Status Call
- Smart PTT
- Talkgroup Calls
  - Selecting a Talkgroup
- Selective Calls
Trunking Features
- Features Used on Trunking Systems
- Viewing Your Radio’s ID Number
- Programming a Page or Call Number
- Programming a Page or Call Name
  - Hang Up Box (HUB)
- Enhanced Private Conversation
- Dynamic Regrouping
  - Electronic (Menu) Mode Selection
  - Selecting Enable and Disable
- SmartZone Operation
- Out-of-Range Indication
- Trunked Announcement
  - Initiating an Announcement
Secure Features
- Features Available on Secure XTL 1500
- Transmitting in Secure and Clear Modes
- System Considerations
- Loss Indication
- Selecting a Key (Conventional Only)
Troubleshooting
Accessories
- Antennas
- Speakers
- Trunnion Kits
Appendix: Maritime Radio Use in the VHF Frequency Range
- Special Channel Assignments
  - Emergency Channel
  - Non-Commercial Call Channel
- Operating Frequency Requirements
Glossary
Commercial Warranty and Service
- Limited Warranty
- Service
Index
Control Head Foldout Page

Common Radio Features

Turning Scan On or Off

Deleting Nuisance Modes

During scanning, you can temporarily delete modes you do not want to

hear. This feature must be preprogrammed by your system manager.

Follow these steps to delete a nuisance mode:

1 Press m below SCAN.

Alternatively press the preprogrammed

Scan button.

2 The display shows SCAN ON if

previously SCAN OFF was selected

and the scan indicator is turned on.

3 The display shows SCAN OFF if previously

SCAN ON was selected and the scan

indicator is turned off

1 When the radio is locked onto the mode you want to delete,

Press the preprogrammed Nuisance Delete button.

Press the NUIS softkey to delete the mode.

A valid key-press chirp tone sounds. The mode is deleted and

the radio continues to scan the remaining modes.

Note: You cannot delete priority modes and the designated

transmit channel.

2 To resume scanning the deleted mode, press scan off and then

back on again.

Turn power off and then back on again.

SCAN

96C67_Text.book Page 32 Thursday, March 1, 2007 8:54 AM