User's Manual

ManualsBrandsMotorola Solutions ManualsElectronicsMOBILE 2-WAY RADIO

Table Of Contents

Product Safety and RF Exposure Compliance
ATTENTION!
Computer Software Copyrights
Documentation Copyrights
Disclaimer
Patent Disclosure
Notations Used in This Manual
Getting to Know Your Radio
- Important Rebanding Information
- Major Radio Components
  - The XTL 1500 Radio
  - The Control Head
- Using Your Radio: The Basics
Basic Radio Operation
- Monitoring Conventional Modes
- Selecting a Zone and Mode (Channel)
- Receiving on a Conventional Mode
- Adjusting the Squelch Setting
- Receiving on Trunked Systems
- Transmitting on Conventional Modes
- Transmitting on Trunked Systems
- Time-Out Timer
Common Radio Features
- Sending a Status Call (Trunking Only)
- Selecting Transmit Power Level
- Conventional Squelch Options
  - Analog Squelch Options
  - Digital Squelch Options
- Sending an Emergency Alarm
  - Sending an Emergency Call
  - Special Considerations for Emergencies
- Types of Scan
  - Turning Scan On or Off
  - Deleting Nuisance Modes
- PTT-ID (Optional)
- Time-Out Timer
- Telephone Operation (Conventional and Trunking)
  - Answering a Telephone Call
- Call Alert (Conventional and Trunking)
- Optional External Alarms (Horn and/or Lights)
  - Turning External Alarm(s) On or Off
  - When a Call Is Received While Alarms Are Turned On
Conventional Features
- Repeater/Direct Operation
- Status Calls (Digital Modes Only)
  - Sending a Status Call
- Smart PTT
- Talkgroup Calls
  - Selecting a Talkgroup
- Selective Calls
Trunking Features
- Features Used on Trunking Systems
- Viewing Your Radio’s ID Number
- Programming a Page or Call Number
- Programming a Page or Call Name
  - Hang Up Box (HUB)
- Enhanced Private Conversation
- Dynamic Regrouping
  - Electronic (Menu) Mode Selection
  - Selecting Enable and Disable
- SmartZone Operation
- Out-of-Range Indication
- Trunked Announcement
  - Initiating an Announcement
Secure Features
- Features Available on Secure XTL 1500
- Transmitting in Secure and Clear Modes
- System Considerations
- Loss Indication
- Selecting a Key (Conventional Only)
Troubleshooting
Accessories
- Antennas
- Speakers
- Trunnion Kits
Appendix: Maritime Radio Use in the VHF Frequency Range
- Special Channel Assignments
  - Emergency Channel
  - Non-Commercial Call Channel
- Operating Frequency Requirements
Glossary
Commercial Warranty and Service
- Limited Warranty
- Service
Index
Control Head Foldout Page

Common Radio Features

Selecting Transmit Power Level

You may need to change the transmit power level on your XTL 5000

radio based on operating conditions.

Note: When you power on your radio, it automatically defaults to a

HIGH PWR transmit state even if you had selected LOW PWR

before you turned the radio off.

1 Press the m button below PWR.

2 The display shows HIGH PWR or LOW PWR depending on what

was selected previously.

3 Press the softkey to switch from HIGH

PWR to LOW PWR.

PWR

96C67_Text.book Page 26 Thursday, March 1, 2007 8:54 AM