User's Manual

Sending (Enhanced Private) Unit to unit Conversation
Call
Sending a Call Alert Page
Answering a Private (and Enhanced Private)
Conversation Call
Answering a Call Alert Page
Automatic Multiple Site Selection (AMSS)
Viewing the Current Site and Forcing a Site Change
Locking and Unlocking a Site
1 Press the PTT button to transmit the displayed ID
number.
If the radio you are calling is not in service, the display
shows NO ACK. If the other party does not answer
within 20 seconds, the display shows NO ANSR.
2 Press EXIT to exit private call, or press the PTT
button to speak.
3 Press EXIT to hang up.
The radio returns to the home display.
1 Press the PTT button to transmit the displayed ID
number.
If the radio you are paging cannot be reached, you
hear only one beep.
2 Press the PTT button to try again, or press EXIT to
hang up.
If the radio you called has received your page, you
will hear four beeps. The display shows ACK RCVD.
The radio returns to the home display.
When a private call is received, the display alternately
shows CALL RCV and the current mode name. Then the
F annunciator will flash. You hear four alert tones.
1 Press the CALL softkey, or press the preprogrammed
call response button.
2 The display shows the last ID number transmitted or
received. In the case of private call, the display
shows the ID number (Private Conversation II).
3 Press the PTT button to answer the call.
If you hear a busy tone, the system is busy.
4 Press m below RESP, or the preprogrammed call
response button to hang up.
The radio saves the caller’s ID number and returns to
the home display.
When a call alert page is received, the display alternately
shows PAGE RCV and the current mode name. The the F
annunciator blinks. You hear a four-beep tone.
1 Press the PTT button to answer the page.
The display shows the current mode. The alert tone,
and F turn off. The ID is saved as the last ID number
received.
2 Press the PTT button to talk, release to listen.
Everyone who belongs to the talkgroup will hear your
transmission.
OR
If you want to respond to the page with a Private Call:
a. Press m below CALL.
b. The display shows the ID of the paging radio.
3 Proceed to step 1 of “Send a Private Conversation
Call.”
1 Press the SITE/SEARCH button momentarily.
The display shows the number of the site if the radio
is locked (or SCANNING if the radio is scanning).
2 Press and hold down the search button while the
radio scans for a new site.
The radio returns to the home display.
1 Press LOCK, or press the preprogrammed lock button.
2 Press m below SITE. The display shows the
current lock state, and the LOCK, UNLK and EXIT
softkeys.
3 Press m button LOCK or UNLK. The radio saves the
new setting and returns to the home display.
96C67_Text.book Page 4 Thursday, March 1, 2007 8:54 AM