User's Manual
Table Of Contents
- Application and Integration
- Developers Guide
- DECLARATION OF CONFORMITY
- DECLARATION OF CONFORMITY2Revision History5Purpose Of This Document5Distribution5Related Documentation5Module Descriptions and Specifications6iO15 Modem Product Specificationss6Electrical specifications:6Environmental Specifications6Other Specifications
- Purpose Of This Document
- Distribution
- Related Documentation
- Module Descriptions and Specifications
- iO1500R Evaluation board
- Safety Notice - ATTENTION
- iO1500R Hardware Interfacing Information
- Design Considerations For iO1500R OEM Developers
- Module Software And Interface Modes
- Managing User Image Profiles
- How To Use Hayes Compatible Packet Data mode
- iDEN data modules – Software integration.
- Additional Information For Registering and Going Offline
- Summary Of AT Commands
- Appendix A: Requirements For FCC Testing
Revision History
Date Revision Comments
May 5, 2003
1.3 Initial Release.
Purpose Of This Document
This guide is for the application developer and system integrator who plan to use the
iO1500R iDEN data module in their design of an OEM product. This manual
describes the requirements and interfaces for the integration of the iDEN iO1500R
wireless module into OEM terminal/equipment. These requirements include
instructions for FCC testing, requirements for use with wireless carriers, setup
instructions, pin descriptions, available software, useful AT commands, and design
considerations. This document also covers how to use the iO1500R via Hayes
Compatible Packet Data mode with older legacy equipment whose software cannot
support packet data.
Distribution
This manual will be distributed to the developer on a CD or will be obtainable from
the iDEN Developers web site. This document will refer to related documents and
software, which can aid the OEM designer in integrating the iO1500R into their
product.
Related Documentation
iO1500R Brochure
FCC iO1500R approval (See Appendix A for instructions on how to retrieve it).
OEM Evaluation Board User’s Guide 68P02954C85-O
iDEN Mobile Subscriber DTE/DCE Interface for Data Services 68P81129E10-C
iDEN Data Module iO1500R Application and Integration Developers Guide -
68P02954C65-O, this document.
Note: Please review iDEN technology using the
iDEN Technical Overview – Notes On The iDEN System – 68P81095E55-A
Related Software: iDEN module - Packet Data Applet - FVN4780A
For more information about iDEN subscribers and technology go to the iDEN
site at http://www.mot.com/LMPS/iDEN
20/5/03 page 5 of 37