User's Manual
Table Of Contents
- Application and Integration
- Developers Guide
- DECLARATION OF CONFORMITY
- DECLARATION OF CONFORMITY2Revision History5Purpose Of This Document5Distribution5Related Documentation5Module Descriptions and Specifications6iO15 Modem Product Specificationss6Electrical specifications:6Environmental Specifications6Other Specifications
- Purpose Of This Document
- Distribution
- Related Documentation
- Module Descriptions and Specifications
- iO1500R Evaluation board
- Safety Notice - ATTENTION
- iO1500R Hardware Interfacing Information
- Design Considerations For iO1500R OEM Developers
- Module Software And Interface Modes
- Managing User Image Profiles
- How To Use Hayes Compatible Packet Data mode
- iDEN data modules – Software integration.
- Additional Information For Registering and Going Offline
- Summary Of AT Commands
- Appendix A: Requirements For FCC Testing
Appendix A: Requirements For FCC Testing
The iO1500R has a built in testing software mode called “BERBUG” that is
preferable for FCC testing. This mode, which will be activated by Motorola, allows
the engineers to perform FCC tests.
In BERBUG mode, the developers can communicate with the iO1500R using
Windows HyperTerm program, and prewritten scripts provided by Motorola. These
scripts are simple text files (.TXT format), which are sent to the iO1500R module via
a PC COM port using Hypeterm. The engineers performing the tests for FCC should
use these scripts then RESET the module after each test. The developer should make
sure the iO1500R OEM Module is connected to a serial com port on a PC.
It is recommended that development engineers who will be taking data for FCC
approval use the Motorola iO1500R FCC filing as a guide. This filing can be viewed
online at the FCC’s web site. These instructions show how to access the filing:
Preferred method of accessing the iO1500R FCC filing
If you are viewing this guide online, simply click on this link below to access the
iO1500R FCC filing:
http://gullfoss2.fcc.gov/cgi-
bin/ws.exe/prod/oet/forms/reports/Search_Form.hts?mode=Edit&form=Exhibits&app
lication_id=92993&fcc_id=AZ492FT5826
Alternate method of accessing the iO1500R FCC filing
If you cannot access the iO1500R FCC filing using the above method, try this manual
method that will also take you to the filing.
1) On the Internet, browse to the FCC search site:
www.fcc.gov/oet/fccid/
2) Two pieces of information are needed here to locate the filing. In the field
marked “Grantee Code”, enter this value:
AZ4.
3) In the field marked Equipment Product Code, enter this value:
92FT5826.
4) Hit the “Start Search” button. The results page shows a table listing the
different versions of the filing that were submitted.
5) In the query results, click the icon under “Display Exhibits”. This brings up a
list of all the exhibits (documentation, test results, charts, graphs, test
methodology, etc.) that were submitted for this filing, in PDF format.
Which files to use
The files that are the most useful are the Test Reports and also the Test Setup files.
Specifically, look for Measured Data A, Measured Data B, Measured Data C, and
Test Setup Photos, which also contain test procedures.
20/5/03 page 30 of 37