User's Manual

ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9 35
General Radio Features
Delete a Channel from the Scan List
1 Press and hold the Scan button until the scan indicator blinks
and a good-key chirp is heard.
2 Using the Mode knob (W4) or the Mode rocker button (W5, W7,
W9), locate the channel to be deleted.
Note: If the desired channel resides in a different zone, press the
Zone up
 or Zone down button to change zones, then
use the mode changer to find the desired channel.
3 Press the Sel button to scroll through the available priority
choices until the priority choice disappears.
This indicates that the channel is no longer a member of the
scan list that was assigned to the selected channel.
(Optionally for W7 and W9 Control Heads) Delete a channel
from a scan list by pressing the Del button.
Note: If you delete all members of a scan list, and scan is
subsequently turned on, you will hear a continuous low-
pitched tone, and the display will change to
NO LIST (W4,
W5, W7) or
EMPTY LIST (W9).
You cannot delete the designated transmit mode, the
selected mode, or the fixed scan list members. The selected
mode, by default, is always scanned when scan is turned
on, regardless of whether or not it is explicitly programmed
as a scan list member.
4 Press the Scan or HOME button to exit scan list programming
and return to normal scan operation.