User's Manual
Table Of Contents
- ASTRO® XTL™ 5000 Mobile Radio with W4, W5, W7, and W9 Control Heads User's Guide
- Front Cover
- W4 Quick Reference Card
- W5 Quick Reference Card
- Control Head Front Foldout
- Inside Title Page
- Contents
- Introduction
- Basic Operating Procedures
- General Radio Features
- Often-used Features
- Emergency Call and Alarm
- Scan Operation
- Turn On Scan
- Turn Scan On While Disregarding the Squelch Code (Conventional Modes Only)
- View a Scan List
- Transmit While Scan Is On
- Temporarily Delete a Nuisance Mode With Scan On (W7 and W9 Control Heads Only)
- Restore a Nuisance Mode (W7 and W9 Control Heads Only)
- Change Mode Priorities While Scan Is On (W7 and W9 Control Heads Only)
- Restore Mode Priorities in a Scan List (W7 and W9 Control Heads Only)
- Program a Scan List
- Hang Up Box (HUB)
- Optional External Alarms (Horn and Lights)
- Time-Out Timer
- Push-To-Talk Identification (PTT-ID)
- Conventional Radio Features
- Trunking Operation
- Features Used on Trunking Systems
- Telephone Interconnect List
- Unlimited Telephone Interconnect (W7 and W9 Control Heads Only)
- Enhanced Private Conversation (Digital Modes Only)
- Call Alert Page (Digital Modes Only)
- Failsoft
- Dynamic Regrouping (Digital Modes Only)
- SmartZone® (W7 and W9 Control Heads Only)
- Out-of-Range Indication
- Trunked Announcement
- Secure Operation
- Troubleshooting
- Glossary
- Index
- Control Head Back Foldout
- W7 Quick Reference Card
- W9 Quick Reference Card
- Back Cover
10
Basic Operating Procedures
Turn On the Radio
Basic operation is the same for all radio control heads. Control heads
with additional features are noted.
Do one of the following:
• W4 Control Heads: Rotate the Volume knob clockwise.
• W5 and W7 Control Heads: Press the power button in the
upper left corner of the control unit.
• W9 Control Heads: Slide the power switch on the bottom of
the control unit to the left.
The display and graphics illuminate, indicating that the radio is
on.
When the ASTRO XTL 5000 Digital Mobile Radio is turned on,
the display shows
XTL 5000.
The radio then checks itself for problems.
Note: If
FL##/## (W4,W5,W7) or FAIL ##/## (W9) appears in the
display, the radio will not function until the condition has
been corrected.
If
ER##/## (W4,W5,W7) or ERROR ##/## (W9) appears,
some non-critical data has been changed. If either of these
displays appear, if the display goes blank, or if the unit
appears to be locked up, refer to the “Troubleshooting”
section.