User's Manual
Table Of Contents
- Contents
- Computer Software Copyrights
- Radio Frequency (RF) Exposure Safety Standards
- FCC Licensing Information
- Introduction
- Repeater Overview
- Pre-Installation Considerations
- Repeater Installation
- Alkaline Battery Frame
- Getting Started
- Programming The Repeater
- Programming Your Radios
- Repeater Cloning
- Troubleshooting
- Use and Care
- Motorola Limited Warranty for the United States and Canada
- Accessories
- Appendix A: Repeater Specifications
TROUBLESHOOTING
50
User Guide
TROUBLESHOOTING
Symptom Try This...
No Power
Recharge or replace the Li-Ion battery. Replace AA batteries.
Reposition or replace AA batteries. Extreme operating
temperatures may affect battery life.
Verify repeater is connected to AC/DC.
Limited Talk Range
Steel and/or concrete structures, heavy foliage, buildings or
vehicles decrease range. Check for clear line of sight to improve
transmission. Verify repeaters and radios are correctly programed.
Transmissions are noisy
and not clear
Make sure the radios are set up to 12.5 KHz bandwidth. Repeater
is not fully compatible with radios using companding or set up at 25
KHz bandwidth.