User's Manual

35
GETTING STARTED
User Guide
SELECTING A CHANNEL
The repeaters offer 16 different channels from
which you can choose ONE channel at a time for
the repeater to operate. To select a channel, rotate
the Channel Selector Knob until you reach the
desired channel. Each channel has its own pre-
programmed Frequency, Interference Eliminator
Code and Bandwidth Settings. Please refer to the
following table for factory default values details:
Table 5: Repeater Channels Default Settings
Channel
#
Transmit Band
450 – 455 Mhz
Common Parameters
Receive Band
465 – 470 Mhz–
Frequency
(TX) Index #
Frequency
(TX) Mhz
Code
(Index #)
Code
Value
(Hz)
Bandwidth
Frequency
(RX) Index
#
Frequency
(RX) Mhz
1 65 451.1875 1 67 12.5 KHz 34 466.0375
2 66 451.2375 4 77 12.5 KHz 35 466.0625
3 67 451.2875 8 88.5 12.5 KHz 36 466.0875
4 68 451.3375 29 179.9 12.5 KHz 37 466.1125
5 69 451.4375 0 none 12.5 KHz 38 466.1375
6 70 451.5375 1 67 12.5 KHz 39 466.1625
7 71 451.6375 6 82.5 12.5 KHz 40 466.1875
8 72 452.3125 10 94.8 12.5 KHz 41 466.2125