User's Manual

33
GETTING STARTED
User Guide
GETTING STARTED
TURNING REPEATER ON/OFF
1. Turn the ON/OFF knob clockwise to turn on
the repeater. The repeater front LED will
blink a red light for 3 seconds.
REPEATER STATUS LED (FRONT LED)
Table 4 "Repeater Status LED Indicator (Front
LED) " on page 33 shows the repeater LED status
summary:
Radio LED Indicators
Never transmit without having a
transmit antenna connected to the TX
antenna jack of the repeater.
!
C
a u t i o
n
Table 4: Repeater Status LED Indicator
(Front LED)
MODE LED STATUS
Transmit Solid Red
Receive (RX) Solid Green
Idle
Red (Slow)
Blinking
Power Up
Solid Red 2 – 3
seconds
Transmit Low
Power
Solid Orange