User's Manual

ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9 35
General Radio Features
Deleting a Channel from the Scan List
1 Press and hold until the scan indicator blinks and a
good-key chirp is heard.
2 Using the Mode knob (W4) or the Mode rocker switch (W5, W7,
W9), locate the channel to be deleted.
Note: If the desired channel resides in a different zone, press the
Zone up
 or Zone down button to change zones, then
use the mode changer to find the desired channel.
3 Press to scroll through the available priority choices
until the priority choice disappears.
This indicates that the channel is no longer a member of the
scan list that was assigned to the selected channel.
OR
Press momentarily to scroll through just the scan list
members.
(Optionally for W7 and W9 Control Heads) Delete a channel
from a scan list by pressing .
Note: If you delete all members of a scan list, and scan is
subsequently turned on, you will hear a continuous low-
pitched tone, and the display will change to
NO LIST (W4,
W5, W7) or
EMPTY LIST (W9).
You cannot delete the designated transmit mode, the
selected mode, or the fixed scan list members. The selected
mode, by default, is always scanned when scan is turned
on, regardless of whether or not it is explicitly programmed
as a scan list member.
4 Press or to exit scan list programming and
return to normal scan operation.
Scan
Sel
Rcl
Del
Scan
HOME