User's Manual
Table Of Contents
- ASTRO® XTL™ 5000 Mobile Radio with W4, W5, W7, and W9 Control Heads User's Guide
- Front Cover
- W4 Quick Reference Card
- W5 Quick Reference Card
- W4 and W5 Control Heads Foldout Page
- Inside Title Page
- Product Safety and RF Exposure Compliance
- Computer Software Copyrights
- Documentation Copyrights
- Disclaimer
- Notations Used in this Manual
- Contents
- Introduction
- Basic Operating Procedures
- General Radio Features
- Often-used Features
- Emergency Call and Alarm
- Scan Operation
- Turning On Scan
- Turning Scan On While Disregarding the Squelch Code (Conventional Modes Only)
- Viewing a Scan List
- Transmitting While Scan Is On
- Temporarily Deleting a Nuisance Mode With Scan On (W7 and W9 Control Heads Only)
- Restoring a Nuisance Mode (W7 and W9 Control Heads Only)
- Changing Mode Priorities While Scan Is On (W7 and W9 Control Heads Only)
- Restoring Mode Priorities in a Scan List (W7 and W9 Control Heads Only)
- Programming a Scan List
- Hang Up Box (HUB)
- Optional External Alarms (Horn and Lights)
- Time-Out Timer
- Push-To-Talk Identification (PTT-ID)
- Telephone Interconnect List (Conventional and Trunking)
- Unlimited Telephone Interconnect (W7 and W9 Control Heads Only)
- Call Alert Page (Conventional and Trunking— Digital Modes Only)
- Conventional Radio Features
- Trunking Operation
- Secure Operation
- Troubleshooting
- Glossary
- Index
- W7 and W9 Control Heads Foldout Page
- W7 Quick Reference Card
- W9 Quick Reference Card
- Back Cover
Requesting Dynamic Regrouping
Automatic Multiple Site Selection (AMSS)
Viewing the Current Site
Initiating a Site Scan
Locking on a Site
Selecting Secure Mode
Selecting an Encryption Key
Selecting a Key Index
Erasing an Encryption Key (Single-Key Option
Only)
Erasing an Encryption Key
Press Rpgm. A central acknowledgement tone
sounds and the display shows
RPGM RQST while the
request is being processed.
When the dispatcher acknowledges, four additional
tones sound, the display shows
ACK RCVD, and your
radio returns to normal operation.
Press Site momentarily. If the radio is scanning for a
new site, the display shows
SCANNING.
Press and hold Site until a tone sounds and the
display shows
SCANNING.
1 Press Lock to lock the radio onto the current site.
2 To view its condition (locked or unlocked), press
Lock momentarily. The display shows SITE LOCKED
or
SITE UNLCKD.
OR
To toggle to the opposite condition, press and hold
Lock until a tone sounds and the display changes to
the other condition.
The radio then returns to normal operation.
Press and release the D button. The D indicator
lights up.
1 Press and hold the D button until a tone sounds.
2 Press the Mode rocker switch to scroll to KEY SEL.
3 Press Sel to enter the Key Selection Menu.
4 Press the Mode rocker switch to select the desired
key.
5 Press Sel to select the key.
6 Press HOME or the PTT button to quit.
1 Press and hold the D button until a tone sounds.
2 Press the Mode rocker switch to scroll to INDX SEL.
3 Press Sel to enter the Index Selection Menu.
4 Press the Mode rocker switch to select the desired
index.
5 Press Sel to select the index.
6 Press HOME or the PTT button to quit.
1 Press and hold the D button until a tone sounds. The
display changes to
ERASE KY.
2 Press Sel to erase the key.
3 Press HOME or the PTT button to quit.
1 Press and hold the D button until a tone sounds.
2 Press the Mode rocker switch to scroll to ERASE KY.
3 Press Sel to enter the Key Erase Menu.
4 Press the Mode rocker switch to select the desired
index.
5 Press Sel to select the index.
6 Press HOME or the PTT button to quit.