User's Guide
Table Of Contents
- Product Safety and RF Energy Exposure Booklet for Mobile Two-Way Radios Installed in Vehicles or ...
- Folleto de normas de seguridad y exposición a la energía de RF al usar radios bidireccionales móv...
- Folheto de normas de segurança e de exposição à energia de RF quando da utilização de rádios bidi...
- Sécurité du produit et exposition à l’énergie de RF pour radios bidirectionnelles mobiles install...
8
English
Vehicles
To avoid possible interaction between the radio transmitter and any vehicle
electronic control modules, such as ABS, engine, or transmission controls, the
radio should be installed only by an experienced installer and the following
precautions should be used when installing the radio:
1. Refer to the manufacturer’s instructions or other technical bulletins for
recommendations on radio installation.
2. Before installing the radio, determine the location of the electronic control
modules and their harnesses in the vehicle.
3. Route all radio wiring, including the antenna transmission line, as far away as
possible from the electronic control units and associated wiring.
Driver Safety
Check the laws and regulations on the use of radios in the area where you drive.
Always obey them.
When using your radio while driving, please:
• Give full attention to driving and to the road.
• Pull off the road and park before making or answering a call if driving conditions
so require.