Installation Manual

September 17, 2004 6881098C38-O
4-10 Motorcycle Radio Installation: Installing the Speaker
4.4.4 Fuel Tank Console Installation with Speaker and Control Head Mounted
Separately
The control head may be mounted to the fuel tank console using the smaller control-head bracket
and spacers/hardware. In this configuration, the microphone cable connector may be attached
directly to the console, eliminating the need for a custom bracket.
Figure 4-5. Fuel Tank Console Installation with Speaker and Control Head Mounted Separately
Installation is the same as detailed in
Section 4.4.2: “Fuel Tank Console Installation with Speaker and
Control Head Mounted Together” on page 4-7 and Section 4.4.3: “Handlebar Installation with
Speaker and Control Head Mounted Separately” on page 4-9.
4.5 Installing the Speaker
Use the following procedure when the speaker is mounted separate from the control head. The
speaker bracket supplied with the speaker may be used alone if a suitable location can be found, or
if necessary, a customer-supplied bracket may be fabricated for mounting the speaker.
1. Determine the location in which the speaker is to be mounted and whether there is a
requirement for a customer-supplied bracket.