User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
7
English
RADIO OVERVIEW
†
This function is activated by EITHER a short OR a long press, but not both.
Speed Dial — Access your phone list directly.
†
—36
Monitor
C
Toggle silent monitor
operation (also turn off
open squelch monitor
when it has been
activated).
Turn on open
squelch
monitor.
——
Option Board
(if one is
installed)
N
Toggle between activating and deactivating
the option board.
†
——
Radio Call — Access the radio call menu.
†
——
Light — Adjust brightness level (off/low/med/high).
†
——
Auxiliary
Control (1/2)
—
Activate or deactivate a pin on the
accessory connector.
†
(See your dealer.)
——
Menu/Enter
Enter the menu or confirm selection
.
†
——
Exit
Step one level back in the
menu.
Exit the menu.
——
Up/Down
Step through menu choices.
——
Horn and Lights —
Toggle external alarm feature or cancels a
triggered alarm.
†
——
†
This function is activated by EITHER a short OR a long press, but not both.
Function Indicator Short Press Long Press Hold Down Page Button