User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
37
English
AUDIO/TONE
SETTINGS
AUDIO/TONE SETTINGS
You can customize the audio and tone feature
settings on your radio.
Note: The enhanced keypad microphone is
required to use this feature.
1
Press the
Menu/Enter
button to
enter Menu
Mode.
2 y or z until
3
Press the
Menu/Enter
button to
select
Audio/Tones
Audio/Tones
4 y or z until you see the feature you want to
change. (See the table below.)
5
Press the
Menu/Enter
button to
select the
feature. You will see the feature’s current
setting.
6 y or z for available settings. (See the table
below.)
7
Press the
Menu/Enter
button to
select the
desired setting.
Audio/Tone Settings
Feature What it Does Settings
Alert Vol Lvl Allows the volume level of the audio and the volume level
of the alert tones to be set independently.
Ind Alert Off
Ind Alert On
Tone Disable Turns all tones on or off. Tones On
Tones Off