User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
25
English
RADIO CALLS
within communicating distance of another
radio. The J symbol appears on the
display when Talkaround Mode is selected.
To select either Repeater Mode or Talkaround
Mode:
Press the preprogrammed Repeater/
Talkaround button (see page 6) to toggle
between Repeater Mode and Talkaround
Mode.
–
or– (using the enhanced keypad microphone)
SETTING THE POWER LEVEL B
Each channel in your radio has a predefined
transmit power level that can be changed.
• High power ( S )
• Low power ( R )
You can set the power level in two ways:
Method 1
Press the preprogrammed Power Level button
(see page 6) to toggle between low and high.
–
or–
Method 2 (
using the keypad microphone)
1 Press the Menu/Enter button to enter Menu
Mode.
2 y or z until
3 Press the Menu/
Enter button to select
4 y or z until
or until
5 Press the Menu/Enter button to confirm your
selection.
Rptr/Talkarnd
Rptr/Talkarnd
Repeater Mode
Talkarnd Mode
1 Press the Menu/Enter button to enter Menu
Mode.
2 y or z until
3 Press the Menu/
Enter button to select
4 y or z until
5 Press the Menu/
Enter button to select
Utilities
Utilities
Power Level
Power Level