User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
20
English
RADIO CALLS
Method 2
5 Press the PTT.
You will see
6 If the Radio Check is received,
you will see
If not, you will see
7 Press the Exit button
to return to
–or–
Hold down the Exit button to exit Menu Mode.
1
Press the
Menu/Enter
button to enter Menu
Mode.
2 y or z until
3 Press the Menu/Enter
button to select
4 y or z until
5 Press the Menu/Enter
button to select
Call In Prog
Acknowledge
No Acknowledge
Radio Check
Radio Call
Radio Call
Radio Check
Radio Check
6 y or z to locate the desired ID in the
Radio Call List;
–or–
using the enhanced keypad microphone, enter
the ID number of the radio you wish to check.
7 Press the PTT.
You will see
8 If the Radio Check is received,
you will see
If not, you will see
9 Press the Exit button
to return to
–or–
Hold down the Exit button to exit Menu Mode.
Call In Prog
Acknowledge
No Acknowledge
Radio Check