User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
16
English
RADIO CALLS
RECEIVING A SELECTIVE CALL F
When you receive a selective call:
• You will hear two alert tones.
• The yellow LED Indicator flashes.
• The LCD screen displays
F and the
preprogrammed name or ID of the calling
radio, if available.
SENDING A CALL ALERT
™
PAGE
You can alert another person by sending a Call
Alert page.
Note: An enhanced keypad microphone is
required to operate this feature.
To send a Call Alert page:
Method 1
6 y or z to locate the desired ID in the
Radio Call List;
–or–
using the enhanced keypad microphone, enter
the ID number of the radio you want to call.
7 Press the PTT to send the call. The radio
sounds a continuous tone.
8 Press the PTT to talk; release it to listen.
9 When finished with the call,
press the Exit button
to return to
–or–
Hold down the Exit button to exit Menu Mode.
Selective Call
1
Press the
Radio Call
button to enter Menu Mode.
2 y or z until
3 Press the Radio Call
button to select
4 y or z to locate the desired ID in the
Radio Call list;
–or–
using the enhanced keypad microphone, enter
the ID number of the radio you want to page.
5 Press the PTT to send the page.
You will see
6 If the Call Alert page is received,
Call Alert
Call Alert
Call In Prog