User's Manual
Table Of Contents
- CDM1250 Mobile Radio Professional Radio User Guide
- Contents
- Computer Software Copyrights
- Safety
- Radio Overview
- Getting Started
- Radio Calls
- Making a Selective Call
- Receiving a Selective Call F
- Sending a Call Alert™ Page
- Receiving a Call Alert Page
- Radio Check
- responding to emergency alerts E
- Clearing an Emergency Alert E
- Sending an Emergency Remote Monitor
- Sending an Emergency Alert E
- Selective Radio Inhibit
- Repeater or Talkaround J Mode
- Setting the Power Level B
- Name and Call Tone Tagging
- Scan
- Phone
- Audio/Tone Settings
- Utilities
- Warranty
- Accessories
15
English
RADIO CALLS
RADIO CALLS
MAKING A SELECTIVE CALL
You can make a selective call to a particular radio
or group of radios, provided the signalling
protocol supports it.
Note: An enhanced keypad microphone is
required to operate this feature.
To make a Selective Call:
Method 1
Method 2
1
Press the
Radio Call
button to enter Menu mode.
2 y or z until
3 Press the Radio Call
button to select
4 y or z to locate the desired ID in the
Radio Call list;
–or–
using the enhanced keypad microphone, enter
the ID number of the radio you want to call.
Selective Call
Selective Call
5 Press the PTT to send the call. The radio
sounds a continuous tone.
6 Press the PTT to talk; release it to listen.
7 When finished with the call, press the Radio
Call button to exit.
1
Press the
Menu/Enter
button to enter Menu
Mode.
2 y or z until
3 Press the Menu/
Enter button to select
4 y or z until
5 Press the Menu/
Enter button to select
Radio Call
Radio Call
Selective Call
Selective Call