Installation Manual

6878215A01
2-26 Standard Configurations Radio Mounting
Figure 2-29. O9 Control Head Installation Exploded View
Figure 2-30. O5 Control Head Rear View
(Also applicable for O2 and O7 Control Heads)
ADJUST THE CONTROL HEAD TO
DESIRED ANGLE AND SECURE
WITH WING SCREWS
USE FOUR MOUNTING SCREWS
ON ALL INSTALLATIONS
TRUNNION
DRILL FOUR 5/32'' HOLES
IN MOUNTING SURFACE
MOUNTING SURFACE
IMPORTANT
USE A METAL BACKING PLATE
(NOT SUPPLIED) IF MOUNTING
TRUNNION ON PLASTIC OR
UNSTABLE SURFACE