User's Manual

Advanced Features
English
41
6 > or < to select the call type.
7 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
8 Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
9 Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
green.
10 If there is no voice activity for a programmed period of time,
the call ends.
OR
The call ends when it reaches the maximum ring time.
OR
Use the PTT button:
1 > or < to CNTS.
2 Press the Menu Select button directly below CNTS.
3 > or < to the required subscriber alias.
4 Press the Menu Select button directly below CNTS. The
display shows Contact Alias.
5 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
6 Press the PTT button to initiate the call. During the call, the
display shows the subscriber alias.
7 Press and hold the PTT button to talk. The LED lights up
solid red.
OR
Release the PTT button to listen. The LED lights up solid
yellow.
8 If there is no voice activity for a preprogrammed period of
time, the call ends.
OR
The call ends when it reaches the maximum ring time.
Adding a New Contact Entry
Procedure:
1 > or < to CNTS.
2 Press the and hold Menu Select button directly below
CNTS. The entries are alphabetically sorted.
3 > or < to {NEW CONTACT} and press the Menu Select
button directly below SEL.
4 The display shows NAME.
Use the keypad to enter the name.
Press < to move one space to the left.
