User's Manual
Table Of Contents
- Contents
- Introduction
- Basic Operating Procedures
- General Radio Features
- Often-Used Features
- Emergency Call and Alarm
- Scan Operation
- Turning On Scan
- Turning Scan On While Disregarding the Squelch Code (Conventional Modes Only)
- Viewing a Scan List
- Transmitting While Scan Is On
- Temporarily Deleting a Nuisance Mode with Scan On (W7 and W9 Control Heads Only)
- Restoring a Nuisance Mode (W7 and W9 Control Heads Only)
- Changing Mode Priorities While Scan Is On (W7 and W9 Control Heads Only)
- Restoring Mode Priorities in a Scan List (W7 and W9 Control Heads Only)
- Programming a Scan List
- Hang Up Box (HUB)
- Optional External Alarms (Horn and Lights)
- Time-Out Timer
- Push-To-Talk Identification (PTT-ID)
- Telephone Interconnect List (Conventional and Trunking)
- Unlimited Telephone Interconnect (W7 and W9 Control Heads Only)
- Call Alert Page (Conventional and Trunking— Digital Modes Only)
- Conventional Radio Features
- Trunking Operation
- Secure Operation
- Troubleshooting
- Glossary
- Index
- W7 and W9 Control Heads Foldout Page
ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9 69
Conventional Radio Features
Viewing Your Unit ID Number
1 Press momentarily to select the Selective Call
feature.
The Call indicator lights.
2 Do one of the following:
• Turn the Mode knob (W4) counterclockwise or press the
Mode down
rocker switch (W5, W7, W9) to locate the MY
ID
display.
OR
• W7 and W9 Control Heads only: When not in the
scratchpad, press the * button.
The display will alternate between
MY ID and your ID
number.
3 To return to normal operation, press or
button.
Call
HOME Call