User's Manual

19
English
SCAN
SCAN
Your radio can monitor multiple channels in a
scan list. Your dealer can program up to four
different channels into a scan list. When your
radio detects activity on a scan list channel, it
will automatically switch to that channel.
STARTING OR STOPPING SCAN
The green LED indicator blinks during a scan
operation and stops blinking when the radio
switches to a channel.
You can start or stop a scan operation by:
TALKBACK
The Talkback feature allows you to respond to a
transmission while scanning. If transmission is
detected on a channel while scanning, the radio
will stop on that channel for a preprogrammed
period of time. During this “hangtime” you may
respond by pressing the PTT.
Note: If transmission ceases or if the PTT is
not pressed for a preprogrammed dura-
tion, the radio continues to scan. The
LED scan indicator stops blinking while
the radio is in hangtime.
1 To start or stop a scan operation, press the
preprogrammed Scan button (see page 12).
- or -
2 Select a channel that has been
preprogrammed by your dealer to start Auto
Scan.
Note: You do not need to press a prepro-
grammed Scan button.
3 Select a channel that has not been
preprogrammed by your dealer to stop Auto
Scan.
06_Scan.fm Page 19 Wednesday, September 25, 2002 10:23 AM