User's Guide

20
Radio Firmware Features
22. Audio Volume Attenuation
23. Scan Select
24. Group Scan Select
10.1 Toggle High/Low Power
Refer to “Power Level” on page 9.
10.2 Monitor
Monitor feature allows you to listen to current channels of
Conventional dispatch type. Monitor mode places receiver in Carrier
Squelch, overriding receive PL (or CTCSS) signaling. This is a press
and hold feature, which is assigned to a PF Button. The "MON" icon
appears on the LCD when you press the assigned ‘Monitor’ PF
button.
The ‘Monitor’ PF Button automatically sets the short press as quiet
monitoring and the long press as noise monitoring.
Both presses will override PL or Open, depending on setting.
10.3 Toggle Scan On/Off
The assigned button toggles between Scan On and Scan Off when
you press the assigned ‘Toggle’ PF button. The radio will sound and
“SCAN” is displayed on LCD. Press the assigned ‘Toggle’ PF Button
again to enter Group Scan. “G SCAN” will be displayed on the LCD,
provided the radio is in the group which has been selected as Group
Scan member and there are more than two group scan members
programmed in this radio.
PM1200.book Page 20 Thursday, June 21, 2007 3:58 PM