User's Manual

PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement
Issue 6.0 May 2011 Page 7 of 77
PTP 200 Series Backhauls –5.4 and 4.9 GHz
Figure 7: PTP 200
Integrated
PTP 54200 and 49200
Figure 8: PTP 200
Connectorized
PTP 54200 and 49200
PTP 230 Series Backhauls –5.4 and 5.8 GHz
Figure 9: PTP 230
Integrated
PTP 54230 and 58230
This guide should be used along with the Motorola PMP Solutions User Guide, which covers
general information, including all network features, RF control features, and GUI (Graphical User
Interface) features common across PMP 100, 400, and 500 Series networks and PTP 100 and
200 Series bridges. The Motorola PMP Solutions User Guide is available from the “User Guides”
section of the Canopy Document Library,
http://motorola.motowi4solutions.com/support/library/?region=1&cat=8.
This guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP)
knowledge and background.
This issue, Issue 6, is consistent with features provided by Canopy Release 11.0.1 (and
consistent with features provided by PTP 230 Canopy Release 10.7). Separate Release Notes for
each release are available and include open issues and other important information specific to
each release.
R11.0.1 and R10.7 Software and software release notes can be downloaded from the Motorola
support web site:
http://motorola.wirelessbroadbandsupport.com/software/.
1.1 DOCUMENT CHANGE HISTORY
Issue 1
First Issue
Issue 2
Added the following:
PTP 200 Series – 5.4-GHz BHs
PMP 400 and PTP 200 – Products using AES encryption