User's Manual
Table Of Contents
- Introduction
- Product Description
- Technology and Benefits
- Applications
- Configuration Options – RF, IP, DFS
- Power and Grounding
- Administration Systems
- Specifications
- Radio specifications (common to all formats)
- Specifications for PMP 430 (5.4 & 5.8-GHz) SM and PTP 230 (5.4 & 5.8-GHz) BH radio with integrated antenna
- Specifications for PMP 400 (4.9 & 5.4-GHz) AP/SM and PTP 200 (4.9 & 5.4-GHz) BH radio with integrated antenna
- Specification for PMP 400/430 AP and PTP 200 BH connectorized radio
- Specifications for PMP 400/430 kitted, connectorized radio (antenna included)
- Performance
- Planning
- Configuring
- Installation
- Regulatory and Legal Notices
- Important Note on Modifications
- National and Regional Regulatory Notices
- U.S. Federal Communication Commission (FCC) Notification
- Industry Canada (IC) Notification
- Regulatory Requirements for CEPT Member States (www.cept.org)
- European Union Notification for 5.8 GHz Product
- Equipment Disposal
- EU Declaration of Conformity for RoHS Compliance
- UK Notification
- Luxembourg Notification
- Czech Republic Notification
- Greece Notification
- Brazil Notification
- Labeling and Disclosure Table for China
- Exposure Separation Distances
- Legal Notices
- Limit of Liability
PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement
Issue 6.0 May 2011 Page 58 of 77
10. Adjust down tilt per calculations
done during Planning. Confirm
down tilt after the radio is
operational using SMs in the field at
selected test locations.
Procedure 3: Assembling a 4.9 GHz AP, and attaching to tower
1. Perform a parts check to
ensure all parts are
present.
2. Assemble unit per the
instructions that come with
the kit.