User's Manual
Table Of Contents
- Introduction
- Product Description
- Technology and Benefits
- Applications
- Configuration Options – RF, IP, DFS
- Power and Grounding
- Administration Systems
- Specifications
- Radio specifications (common to all formats)
- Specifications for PMP 430 (5.4 & 5.8-GHz) SM and PTP 230 (5.4 & 5.8-GHz) BH radio with integrated antenna
- Specifications for PMP 400 (4.9 & 5.4-GHz) AP/SM and PTP 200 (4.9 & 5.4-GHz) BH radio with integrated antenna
- Specification for PMP 400/430 AP and PTP 200 BH connectorized radio
- Specifications for PMP 400/430 kitted, connectorized radio (antenna included)
- Performance
- Planning
- Configuring
- Installation
- Regulatory and Legal Notices
- Important Note on Modifications
- National and Regional Regulatory Notices
- U.S. Federal Communication Commission (FCC) Notification
- Industry Canada (IC) Notification
- Regulatory Requirements for CEPT Member States (www.cept.org)
- European Union Notification for 5.8 GHz Product
- Equipment Disposal
- EU Declaration of Conformity for RoHS Compliance
- UK Notification
- Luxembourg Notification
- Czech Republic Notification
- Greece Notification
- Brazil Notification
- Labeling and Disclosure Table for China
- Exposure Separation Distances
- Legal Notices
- Limit of Liability
PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement
Issue 6.0 May 2011 Page 30 of 77
10 dBm tx power gives the U.S./Europe regulatory max 27 dBm EIRP. (10MHz Channel)
13 dBm tx power gives the U.S./Europe regulatory max 30 dBm EIRP. (20MHz Channel)
4.9 GHz - 17 dBi gain for antenna. 17 dBi antenna gain plus 18 dBm tx power gives
35 dBm EIRP.
13 lb, 28 x 8.25 x 11 in (hwd) or ~6 kg, 71 x 21 x 28 cm (hwd)
Figure 21: CAP 49400
Figure 22: CAP 58430 and 54430