User's Manual

PMP 400/430 and PTP 200/230 Series Motorola PMP Solutions User Guide Supplement
Issue 6.0 May 2011 Page 27 of 77
SM
4.9, 5.4
and 5.8-
GHz
SM Auto Transmit Power Control (TPC) with power set by the AP to
provide power leveling for close-in SMs
PMP 430 AP/SM: configurable channel bandwidth: 5, 10 or 20MHz
PMP 430 AP/SM: configurable cyclic prefix (1/4, 1/8 or 1/16)
PMP 430 AP: Max range 1-30 miles for 5 and 10MHz channel bandwidth, 1-24 miles for
20MHz channel bandwidth
PMP 400 AP: Max range 1-30 miles
PMP 400 AP/SM and PTP 200 BH: channel bandwidth fixed at 10MHz
PMP 400 AP/SM: cyclic prefix fixed at 1/4
PTP 200 BH: configurable cyclic prefix (1/4 or 1/8)
PTP 230 BH: configurable channel bandwidth: 10 or 20MHz
PTP 230 BH: configurable cyclic prefix (1/4, 1/8 or 1/16)
PTP 230 BH: Max range 1-30 miles for 10MHz channel bandwidth, 1-24 miles for 20MHz
channel bandwidth
Under 22 W DC power
Environment range of -40°C to +55°C (-40°F to +131°F); 0 to 95% relative humidity, non-
condensing
PMP 400/430 and PTP 200/230 products are available with either DES or AES
encryption
2.6.2 Specifications for PMP 430 (5.4 & 5.8-GHz) SM and PTP 230 (5.4 & 5.8-GHz)
BH radio with integrated antenna
Radio with an integrated, internal vertically polarized antenna
1 lb, 11.75 x 3.4 x 3.4 in (hwd) or ~.45 kg, 29.9 x 8.6 x 8.6 cm (hwd)
PMP 430 Configurable channel bandwidth: 5, 10 or 20MHz
PTP 230 Configurable channel bandwidth: 10 or 20MHz
Configurable cyclic prefix: 1/4, 1/8 or 1/16
10 dBi patch antenna - 55° x 55° and 3 dB beam width
Optional LENS mounts directly to SM or BH– No additional mounting hardware required
o adds 6 dBi to 10 dB internal patch antenna which can increase range
o narrows beam width by 3x (from 55° to 18°) which can reduce interference
caused by multi-path reflections
o LENS part number: AN500A
Optional Reflector dish
o adds 15 dBi to 10 dB internal patch antenna which can increase range
o narrows beam width (from 55° to 6°) which can reduce interference caused by
multi-path reflections