User's Manual

Preliminary
JUL
2010
CMM4
User
Guide
PMP 320 Hardware Installation Configuring CMM4 ports
Figure 3-6 Port Status Showing Power Fault
Configuring CMM4 ports
T o configure the ports that have been connected in this installation procedure, refer to the
located at: .
http://motorola.wirelessbroadbandsupport.com/software/
Other Installation Considerations
If two CMM4 devices are synchronized together , the CMM4 that does not have a GPS needs
to be set up via the GUI as a CMM slave device. Refer to the CMM4 User guide located at :
.
http://motorola.wirelessbroadbandsupport.com/software/