User's Manual

2-16 PMP320HDW2v1
Preliminary
JUL
2010
Attach the AP assembly to a pole Chapter 2: AP Hardware Installation
Attach the AP assembly to a pole
W AR NING
Maintain a safe distance from RF exposure when mounting the AP on the tower 50 cm
(20 inches). Maintain a safe distance from power lines.
The network planner should provide the antenna pattern information for the installation. The
network is planned from true north 0 degrees. Use a compass to ensure there is no overlap of
the antennas as they are installed.
Figure 2-4 Mounting the AP to the tower
AP
Communications B l dg
Cable Tray
BT-0781S-XXX
BT-0781S-XXX
AP Grounded
to
Tower
with 10AWG wire
Network
Switch or
Router
CMM4
Drip Loop
600SSD
AC Power
SGPN4076
200SSB
Tower Ground
Earth Ground
Tower